Haier Heat Pump Hot Water
Haier is one of the largest appliance makers in the world, and its hot water heat pumps are distributed in Australia by Fisher and Paykel Australia, which also handles warranty and service. The monoblock range uses propane (R290) and is among the quietest all-in-one units on published figures, at 43 dB(A) at one metre for the 200L and 250L. The 330L is the largest single-tank unit here and is the one to look at for a big household that does not want a split system.
Haier hot water heat pump price (2026)
Out-of-pocket assumes federal STCs + a typical state-level top-up. Victorian households can stack up to $2,700 in rebates ahead of the 2027 gas ban; NSW, SA and ACT have their own top-ups. Cheapest model: Haier 200L Monoblock (HP200M1U1P) from $3,000. Largest: Haier 330L Monoblock (HP330M1U1) up to $3,650. Lowest running cost across the range: ~$264/yr.
Haier models and prices (2026)
Haier 200L Monoblock (HP200M1U1P) price
Installed $3,000 - $3,250 before rebates; the federal STC incentive on this model is 15 certificates, about $600, for a 2026 install in zone 3, which covers Sydney, Brisbane, Adelaide and Perth; Melbourne, Canberra and Hobart earn more. So expect roughly $2,400 to $2,650 before any state rebate.
Haier 250L Monoblock (HP250M1U1P) price
Installed $3,150 - $3,400 before rebates; the federal STC incentive on this model is 16 certificates, about $640, for a 2026 install in zone 3, which covers Sydney, Brisbane, Adelaide and Perth; Melbourne, Canberra and Hobart earn more. So expect roughly $2,510 to $2,760 before any state rebate.
Haier 330L Monoblock (HP330M1U1) price
Installed $3,400 - $3,650 before rebates; the federal STC incentive on this model is 15 certificates, about $600, for a 2026 install in zone 3, which covers Sydney, Brisbane, Adelaide and Perth; Melbourne, Canberra and Hobart earn more. So expect roughly $2,800 to $3,050 before any state rebate.
Pros
- 43 dB(A) at 1 metre on the 200L and 250L, quiet for an all-in-one
- Backed in Australia by Fisher and Paykel
- 5 years parts and labour, with the cylinder covered for 7
- Propane (R290) refrigerant
- 330L is the largest all-in-one tank in this comparison
Cons
- Country of manufacture is not published
- The 330L drops to a published COP of 4.00
- Not on the Solar Victoria locally made list, so it earns the lower Victorian rebate tier
- The 330L is wider and deeper than most, so check the space before you order
Best for
Households that want a quiet all-in-one with an established Australian service network behind it
Haier prices & rebates by state
Federal STCs plus state rebates can knock up to $2,700 off the installed price. See Haier pricing for your state.
Haier hot water heat pump FAQ
How much is a Haier hot water heat pump installed in 2026?
A Haier hot water heat pump costs $3,000 - $3,650 fully installed in Australia before rebates. The cheapest model (Haier 200L Monoblock (HP200M1U1P), 195L) starts at $3,000; the largest (Haier 330L Monoblock (HP330M1U1), 330L) tops out around $3,650. After stacking federal STCs (worth $600-$640 depending on the model and your climate zone) and state-based rebates, most households pay $960-$2,550 out of pocket.
Is Haier a good heat pump brand?
Haier is one of the largest appliance makers in the world, and its hot water heat pumps are distributed in Australia by Fisher and Paykel Australia, which also handles warranty and service. The monoblock range uses propane (R290) and is among the quietest all-in-one units on published figures, at 43 dB(A) at one metre for the 200L and 250L. The 330L is the largest single-tank unit here and is the one to look at for a big household that does not want a split system. Haier is best suited to households that want a quiet all-in-one with an established australian service network behind it.
What rebates can I claim on a Haier heat pump?
Every Haier model attracts federal Small-scale Technology Certificates (STCs) worth $600-$640 at point of sale. On top of STCs, Victorian households can stack the Solar Victoria Hot Water Rebate ($1,000-$1,400) and Victorian Energy Upgrades discount ($500-$2,000) to reach up to $2,700 in rebates. NSW (Energy Savings Scheme), SA (REPS), and ACT (Sustainable Household Scheme) have their own state-level top-ups. Most of it is automatic: STCs, Victorian Energy Upgrades and the NSW Energy Savings Scheme are already inside the price your installer quotes. Solar Victoria's rebate is the one worth going after on top, and your installer drives it. They lodge it with your quote, you add ID and proof of income, and it comes off your invoice on approval.
What is the warranty on a Haier heat pump?
Haier backs its tanks with a 7-year warranty and the compressor with 5 years. Workmanship cover for the install itself comes from your installer separately and should be at least 12 months. Warranty claims require the system to have been installed by a licensed plumber and serviced according to the manual.
How efficient is a Haier heat pump?
The Haier 200L Monoblock (HP200M1U1P) runs at COP 4.49 (every 1 kWh of electricity input produces 4.49 kWh of heat output). Annual running cost is around $264 for a 1-3 person household, compared to roughly $700/year for gas storage and $900/year for old-school electric resistive storage.
How long does a Haier heat pump last?
Modern hot water heat pumps last 12-15 years on average in Australian conditions. Tank life depends on water hardness (sacrificial anode replacement every 5 years extends life). Compressor life is the limiting factor and typically matches or exceeds the warranty period when the unit is correctly sized and serviced.
Haier vs other brands: which should I pick?
Haier sits at the budget end of the Australian market. It strikes a balance between quality and price. See the side-by-side comparisons below for direct head-to-head specs.
Compare with other brands
Compare heat pump hot water to other systems
What are you replacing?
Tap one to continue