Haier Heat Pump Prices in Western Australia

A Haier hot water heat pump is $3,000 - $3,650 installed in Western Australia before rebates. After Western Australia rebates and federal STCs, most households pay around $2,360-$3,050 out of pocket. Haier is one of the largest appliance makers in the world, and its hot water heat pumps are distributed in Australia by Fisher and Paykel Australia, which also handles warranty and service. The monoblock range uses propane (R290) and is among the quietest all-in-one units on published figures, at 43 dB(A) at one metre for the 200L and 250L. The 330L is the largest single-tank unit here and is the one to look at for a big household that does not want a split system.

Haier price in Western Australia (2026)

Installed, before rebates
$3,000 - $3,650
WA rebates + STCs
$600-$640
Out of pocket (after stack)
~$2,360-$3,050

Out-of-pocket assumes federal STCs plus Western Australia's available rebate stack, applied by your installer at point of sale. Cheapest model: Haier 200L Monoblock (HP200M1U1P) from $3,000.

7yr
Tank warranty
5yr
Compressor warranty
4.49
COP (efficiency)
43dB
Noise level

Haier rebates in Western Australia

Federal

Small-scale Technology Certificates (STCs)

Applied as a point-of-sale discount on your Haier system. Value varies by model and climate zone.

$600 - $640
estimated value

Western Australia does not currently run a dedicated hot water rebate. Federal STCs above are still applied by your installer, and a Haier heat pump still pays back through lower running costs.

Haier models available in Western Australia

Haier 200L Monoblock (HP200M1U1P)

$3,000 - $3,250
installed, before rebates
Capacity
195L
Running cost
~$264/yr
STC value (zone 3)
~$600
Noise
43dB

Haier 250L Monoblock (HP250M1U1P)

$3,150 - $3,400
installed, before rebates
Capacity
246L
Running cost
~$264/yr
STC value (zone 3)
~$640
Noise
43dB

Haier 330L Monoblock (HP330M1U1)

$3,400 - $3,650
installed, before rebates
Capacity
330L
Running cost
~$296/yr
STC value (zone 3)
~$600
Noise
47dB

Haier prices across Western Australia

Local pricing and free quotes for Haier in major Western Australia areas.

Heat pump hot water costs across regional Western Australia

Heat pump guides for Western Australia

Haier in Western Australia: FAQ

How much does a Haier heat pump cost in Western Australia?

A Haier hot water heat pump costs $3,000 - $3,650 fully installed in Western Australia before rebates. After the federal STC discount, most Western Australia households pay around $2,360-$3,050 out of pocket.

What rebates can I claim on a Haier heat pump in Western Australia?

Western Australia households claim federal STCs worth $600-$640 on a Haier, applied by your installer at point of sale. Your installer applies the discounts at quote time, so you do not chase the paperwork.

Is a Haier heat pump worth it in Western Australia?

Yes. With 40% of Western Australia homes on gas or old electric storage and rising energy prices, a Haier heat pump running at COP 4.49 cuts hot water running costs to around $264/year. Households that want a quiet all-in-one with an established Australian service network behind it

Where can I get a Haier heat pump installed in Western Australia?

PumpSwap matches you with local Western Australia installers who quote on Haier systems. Submit one request and compare up to three quotes from installers covering your suburb, with rebates already factored in.

Compare other brands in Western Australia

Free Quote
Step 1 of 5

What are you replacing?

Tap one to continue