Haier Heat Pump Prices in Northern Territory

A Haier hot water heat pump is $3,000 - $3,650 installed in Northern Territory before rebates. After Northern Territory rebates and federal STCs, most households pay around $2,480-$3,170 out of pocket. Haier is one of the largest appliance makers in the world, and its hot water heat pumps are distributed in Australia by Fisher and Paykel Australia, which also handles warranty and service. The monoblock range uses propane (R290) and is among the quietest all-in-one units on published figures, at 43 dB(A) at one metre for the 200L and 250L. The 330L is the largest single-tank unit here and is the one to look at for a big household that does not want a split system.

Haier price in Northern Territory (2026)

Installed, before rebates
$3,000 - $3,650
NT rebates + STCs
$480-$520
Out of pocket (after stack)
~$2,480-$3,170

Out-of-pocket assumes federal STCs plus Northern Territory's available rebate stack, applied by your installer at point of sale. Cheapest model: Haier 200L Monoblock (HP200M1U1P) from $3,000.

7yr
Tank warranty
5yr
Compressor warranty
4.49
COP (efficiency)
43dB
Noise level

Haier rebates in Northern Territory

Federal

Small-scale Technology Certificates (STCs)

Applied as a point-of-sale discount on your Haier system. Value varies by model and climate zone.

$480 - $520
estimated value

Northern Territory does not currently run a dedicated hot water rebate. Federal STCs above are still applied by your installer, and a Haier heat pump still pays back through lower running costs.

Haier models available in Northern Territory

Haier 200L Monoblock (HP200M1U1P)

$3,000 - $3,250
installed, before rebates
Capacity
195L
Running cost
~$264/yr
STC value (zone 1)
~$520
Noise
43dB

Haier 250L Monoblock (HP250M1U1P)

$3,150 - $3,400
installed, before rebates
Capacity
246L
Running cost
~$264/yr
STC value (zone 1)
~$520
Noise
43dB

Haier 330L Monoblock (HP330M1U1)

$3,400 - $3,650
installed, before rebates
Capacity
330L
Running cost
~$296/yr
STC value (zone 1)
~$480
Noise
47dB

Haier prices across Northern Territory

Local pricing and free quotes for Haier in major Northern Territory areas.

Heat pump guides for the Northern Territory

Haier in Northern Territory: FAQ

How much does a Haier heat pump cost in Northern Territory?

A Haier hot water heat pump costs $3,000 - $3,650 fully installed in Northern Territory before rebates. After the federal STC discount, most Northern Territory households pay around $2,480-$3,170 out of pocket.

What rebates can I claim on a Haier heat pump in Northern Territory?

Northern Territory households claim federal STCs worth $480-$520 on a Haier, applied by your installer at point of sale. Your installer applies the discounts at quote time, so you do not chase the paperwork.

Is a Haier heat pump worth it in Northern Territory?

Yes. With 10% of Northern Territory homes on gas or old electric storage and rising energy prices, a Haier heat pump running at COP 4.49 cuts hot water running costs to around $264/year. Households that want a quiet all-in-one with an established Australian service network behind it

Where can I get a Haier heat pump installed in Northern Territory?

PumpSwap matches you with local Northern Territory installers who quote on Haier systems. Submit one request and compare up to three quotes from installers covering your suburb, with rebates already factored in.

Compare other brands in Northern Territory

Free Quote
Step 1 of 5

What are you replacing?

Tap one to continue