Haier Heat Pump Prices in Tasmania

A Haier hot water heat pump is $3,000 - $3,650 installed in Tasmania before rebates. After Tasmania rebates and federal STCs, most households pay around $2,360-$3,010 out of pocket. Haier is one of the largest appliance makers in the world, and its hot water heat pumps are distributed in Australia by Fisher and Paykel Australia, which also handles warranty and service. The monoblock range uses propane (R290) and is among the quietest all-in-one units on published figures, at 43 dB(A) at one metre for the 200L and 250L. The 330L is the largest single-tank unit here and is the one to look at for a big household that does not want a split system.

Haier price in Tasmania (2026)

Installed, before rebates

$3,000 - $3,650

TAS rebates + STCs

$640-$640

Out of pocket (after stack)

~$2,360-$3,010

Out-of-pocket assumes federal STCs plus Tasmania's available rebate stack, applied by your installer at point of sale. Cheapest model: Haier 200L Monoblock (HP200M1U1P) from $3,000.

7yr

Tank warranty

5yr

Compressor warranty

4.49

COP (efficiency)

43dB

Noise level

Haier rebates in Tasmania

Federal

Small-scale Technology Certificates (STCs)

Applied as a point-of-sale discount on your Haier system. Value varies by model and climate zone.

$640 - $640

estimated value

Tasmania does not currently run a dedicated hot water rebate. Federal STCs above are still applied by your installer, and a Haier heat pump still pays back through lower running costs.

Haier models available in Tasmania

Haier 200L Monoblock (HP200M1U1P)

$3,000 - $3,250

installed, before rebates

Capacity

195L

Running cost

~$264/yr

STC value (zone 5)

~$640

Noise

43dB

Haier 250L Monoblock (HP250M1U1P)

$3,150 - $3,400

installed, before rebates

Capacity

246L

Running cost

~$264/yr

STC value (zone 5)

~$640

Noise

43dB

Haier 330L Monoblock (HP330M1U1)

$3,400 - $3,650

installed, before rebates

Capacity

330L

Running cost

~$296/yr

STC value (zone 5)

~$640

Noise

47dB

Haier prices across Tasmania

Local pricing and free quotes for Haier in major Tasmania areas.

Haier in Devonport Haier in Burnie Haier in Ulverstone Haier in Kingston Haier in Sandy Bay Haier in Glenorchy Haier in Howrah Haier in New Town Haier in Claremont Haier in Blackmans Bay Haier in Prospect Haier in George Town Haier in Bellerive Haier in New Norfolk Haier in Riverside Haier in North Hobart

Heat pump costs in Tasmania

Replacing gas hot water in Tasmania

The swap, step by step, with the installed price after rebates

Find installers in Tasmania All Tasmania rebates

Heat pump hot water costs across regional Tasmania

Cost in Devonport Cost in Burnie Cost in Ulverstone Cost in George Town Cost in New Norfolk

Heat pump guides for Tasmania

Haier in Tasmania: FAQ

How much does a Haier heat pump cost in Tasmania?

A Haier hot water heat pump costs $3,000 - $3,650 fully installed in Tasmania before rebates. After the federal STC discount, most Tasmania households pay around $2,360-$3,010 out of pocket.

What rebates can I claim on a Haier heat pump in Tasmania?

Tasmania households claim federal STCs worth $640-$640 on a Haier, applied by your installer at point of sale. Your installer applies the discounts at quote time, so you do not chase the paperwork.

Is a Haier heat pump worth it in Tasmania?

Yes. With 20% of Tasmania homes on gas or old electric storage and rising energy prices, a Haier heat pump running at COP 4.49 cuts hot water running costs to around $264/year. Households that want a quiet all-in-one with an established Australian service network behind it

Where can I get a Haier heat pump installed in Tasmania?

PumpSwap matches you with local Tasmania installers who quote on Haier systems. Submit one request and compare up to three quotes from installers covering your suburb, with rebates already factored in.