Stiebel Eltron Heat Pump Hot Water
German-engineered heat pump known for build quality and reliability. Stiebel Eltron has been manufacturing water heating products since 1924. Their WWK series offers excellent efficiency with German precision engineering.
Stiebel Eltron hot water heat pump price (2026)
Out-of-pocket assumes federal STCs + a typical state-level top-up. Victorian households can stack up to $2,700 in rebates ahead of the 2027 gas ban; NSW, SA and ACT have their own top-ups. Cheapest model: Stiebel Eltron WWK 302H from $3,800. Largest: Stiebel Eltron WWK 302H up to $4,800. Lowest running cost across the range: ~$340/yr.
Available Models
Stiebel Eltron WWK 302H
Pros
- German engineering quality
- Good efficiency
- Solid warranty backing
- Established global brand (100+ years)
- Strong Australian support network
Cons
- Higher cost than local brands
- Heavier unit
- Not Australian-made (misses higher VIC rebate tier)
Best for
Those who value German engineering and build quality at a mid-to-premium price point
Check Stiebel Eltron rebates in your state
Federal STCs plus state rebates can knock up to $2,700 off the installed price.
Stiebel Eltron hot water heat pump FAQ
How much is a Stiebel Eltron hot water heat pump installed in 2026?
A Stiebel Eltron hot water heat pump costs $3,500 - $5,000 fully installed in Australia before rebates. The cheapest model (Stiebel Eltron WWK 302H, 302L) starts at $3,800; the largest (Stiebel Eltron WWK 302H, 302L) tops out around $4,800. After stacking federal STCs (worth $800-$800 depending on the model and your climate zone) and state-based rebates, most households pay $1,500-$3,500 out of pocket.
Is Stiebel Eltron a good heat pump brand?
German-engineered heat pump known for build quality and reliability. Stiebel Eltron has been manufacturing water heating products since 1924. Their WWK series offers excellent efficiency with German precision engineering. Stiebel Eltron is best suited to those who value german engineering and build quality at a mid-to-premium price point.
What rebates can I claim on a Stiebel Eltron heat pump?
Every Stiebel Eltron model attracts federal Small-scale Technology Certificates (STCs) worth $800-$800 at point of sale. On top of STCs, Victorian households can stack the Solar Victoria Hot Water Rebate ($1,000-$1,400) and Victorian Energy Upgrades discount ($500-$2,000) to reach up to $2,700 in rebates. NSW (PDRS), SA (REPS), and ACT (Sustainable Household Scheme) have their own state-level top-ups. Your installer applies the discounts at quote time so you do not chase paperwork.
What is the warranty on a Stiebel Eltron heat pump?
Stiebel Eltron backs its tanks with a 5-year warranty and the compressor with 5 years. Workmanship cover for the install itself comes from your installer separately and should be at least 12 months. Warranty claims require the system to have been installed by a licensed plumber and serviced according to the manual.
How efficient is a Stiebel Eltron heat pump?
The Stiebel Eltron WWK 302H runs at COP 3.8 (every 1 kWh of electricity input produces 3.8 kWh of heat output). Annual running cost is around $340 for a 3-5 person household, compared to roughly $700/year for gas storage and $900/year for old-school electric resistive storage.
How long does a Stiebel Eltron heat pump last?
Modern hot water heat pumps last 12-15 years on average in Australian conditions. Tank life depends on water hardness (sacrificial anode replacement every 5 years extends life). Compressor life is the limiting factor and typically matches or exceeds the warranty period when the unit is correctly sized and serviced.
Stiebel Eltron vs other brands: which should I pick?
Stiebel Eltron sits at the mid-range end of the Australian market. It strikes a balance between quality and price. See the side-by-side comparisons below for direct head-to-head specs.
Compare with other brands
What's your postcode?
See costs and rebates for your area