Emerald All-In-One Pro 220L Price 2026: Installed and Rebates
What the Emerald All-In-One Pro 220L costs installed, what the federal and state rebates take off in each state, and the specifications Emerald publishes for it. A 220L R290 (propane) heat pump for a 2-3 person household.
Free, takes about a minute. Up to 3 local installers quote, you choose.
Emerald All-In-One Pro 220L price (2026)
Modelled estimate, checked 23 September 2026: built from published before-rebate installed prices for this model, not Emerald's list price and not a quote. The STC discount is 16 certificates for a 2026 install in zone 3, which covers Sydney, Brisbane, Adelaide and Perth; Melbourne, Canberra and Hobart earn more, at the $40 clearing house cap. From 1 January 2027 the same system earns about one fifth fewer certificates, so the discount falls again.
Emerald All-In-One Pro 220L price after rebates, by state
Certificates depend on the climate zone of the capital city. State rebates have their own eligibility rules, so follow the state link before you count on one.
| State | STC discount | After STCs | After state rebates |
|---|---|---|---|
| Victoria Zone 4 | ~$720 (18 STCs) | $2,030 to $2,780 | Up to $1,580 |
| New South Wales Zone 3 | ~$640 (16 STCs) | $2,110 to $2,860 | $1,470 to $2,530 |
| Queensland Zone 3 | ~$640 (16 STCs) | $2,110 to $2,860 | See QLD rebates |
| South Australia Zone 3 | ~$640 (16 STCs) | $2,110 to $2,860 | See SA rebates |
| Australian Capital Territory Zone 5 | ~$680 (17 STCs) | $2,070 to $2,820 | See ACT rebates |
| Western Australia Zone 3 | ~$640 (16 STCs) | $2,110 to $2,860 | See WA rebates |
| Tasmania Zone 5 | ~$680 (17 STCs) | $2,070 to $2,820 | See TAS rebates |
| Northern Territory Zone 1 | ~$560 (14 STCs) | $2,190 to $2,940 | See NT rebates |
Victoria includes the Solar Victoria rebate and Victorian Energy Upgrades; New South Wales includes the Energy Savings Scheme discount. Both are ranges because the amount depends on the system you replace and the installer.
Emerald All-In-One Pro 220L specifications
| Specification | Figure | Source |
|---|---|---|
| Tank capacity | 220L | PumpSwap brand data |
| Coefficient of performance (COP) | 4.9 | Emerald's published figure |
| Sound level | 49 dB | Emerald's published figure |
| Refrigerant | R290 (propane) | Emerald data sheet |
| Dimensions (H x W x D) | 1598 x 600 x 600 mm | PumpSwap brand data; confirm on the installer's data sheet |
| Weight | 118 kg | PumpSwap brand data; confirm on the installer's data sheet |
| Warranty | 7 years tank, 5 years compressor | Emerald's terms for the range, as held in PumpSwap brand data; confirm the current terms on your quote |
| Register model code | EE-HWS-A1-220E | Clean Energy Regulator register, read 23 September 2026 |
| Running cost | ~$242 a year | Modelled from the COP: four people, 200L a day, 31c/kWh |
| Suited to | 2-3 person household | PumpSwap sizing guide |
Emerald is not listed as Australian made. Emerald is not on Solar Victoria's locally made list, so it earns the standard Victorian rebate tier.
Emerald All-In-One Pro 220L: common questions
How much does the Emerald All-In-One Pro 220L cost installed in 2026?
Our modelled installed price for the Emerald All-In-One Pro 220L is $2,750 - $3,500 before rebates, built from published installed prices and checked 23 September 2026. The federal STC discount on this model is 16 certificates, about $640, for a 2026 install in zone 3, which covers Sydney, Brisbane, Adelaide and Perth; Melbourne, Canberra and Hobart earn more. That leaves roughly $2,110 to $2,860 before any state rebate. Your installer's quote is the real price: it depends on access, the old system and the electrical work.
Who is the Emerald All-In-One Pro 220L suited to?
It is a 220L tank, which suits a 2-3 person household on our sizing guide. Across the Emerald range, it is best for: households wanting a high published efficiency and a long tank warranty without paying split-system prices.
What warranty comes with the Emerald All-In-One Pro 220L?
Emerald publishes a 7-year tank warranty and 5 years on the compressor for its range. Workmanship on the install is the installer's own warranty, so ask each installer for theirs in writing.
How noisy is the Emerald All-In-One Pro 220L?
Emerald publishes 49 dB for this model. Check the distance each maker measures at when you compare brands; most publish a figure at one metre.
Other Emerald models
What are you replacing?
Tap one to continue