Emerald Heat Pump Prices in South Australia

A Emerald hot water heat pump is $2,750 - $3,750 installed in South Australia before rebates. After South Australia rebates and federal STCs, most households pay around $2,110-$3,110 out of pocket. Emerald Energy is an Australian company that has sold hot water heat pumps here since 2006, and its All-In-One range is now one of the most widely stocked propane (R290) units in the country. The Pro series is the flagship: an enamel tank with two magnesium anodes, a published coefficient of performance between 4.8 and 5.2, and operation down to -7C on the heat pump alone. The Select series sits below it on both efficiency and warranty. Emerald describes itself as Australian and does not publish where the units are built.

Emerald price in South Australia (2026)

Installed, before rebates
$2,750 - $3,750
SA rebates + STCs
$640-$640
Out of pocket (after stack)
~$2,110-$3,110

Out-of-pocket assumes federal STCs plus South Australia's available rebate stack, applied by your installer at point of sale. Cheapest model: Emerald All-In-One Pro 220L from $2,750.

7yr
Tank warranty
5yr
Compressor warranty
4.9
COP (efficiency)
49dB
Noise level

Emerald rebates in South Australia

Federal

Small-scale Technology Certificates (STCs)

Applied as a point-of-sale discount on your Emerald system. Value varies by model and climate zone.

$640 - $640
estimated value
Certificate

Retailer Energy Productivity Scheme (REPS)

South Australian households via participating energy retailers. There is no fixed rebate amount: South Australia does not set or publish prices, so the incentive is a variable discount or subsidised install applied by your retailer. A minimum co-payment of $33 including GST may apply, and is waived for concession and priority-group households.

Varies
estimated value

Emerald models available in South Australia

Emerald All-In-One Pro 220L

$2,750 - $3,500
installed, before rebates
Capacity
220L
Running cost
~$242/yr
STC value (zone 3)
~$640
Noise
49dB

Emerald All-In-One Pro 270L

$3,200 - $3,600
installed, before rebates
Capacity
270L
Running cost
~$247/yr
STC value (zone 3)
~$640
Noise
49dB

Emerald All-In-One Pro 320L

$3,400 - $3,750
installed, before rebates
Capacity
320L
Running cost
~$228/yr
STC value (zone 3)
~$640
Noise
49dB

Emerald All-In-One Select 270L

$3,050 - $3,300
installed, before rebates
Capacity
270L
Running cost
~$269/yr
STC value (zone 3)
~$640
Noise
50dB

Emerald prices across South Australia

Local pricing and free quotes for Emerald in major South Australia areas.

Heat pump guides for South Australia

Emerald in South Australia: FAQ

How much does a Emerald heat pump cost in South Australia?

A Emerald hot water heat pump costs $2,750 - $3,750 fully installed in South Australia before rebates. After stacking those rebates, most South Australia households pay around $2,110-$3,110 out of pocket.

What rebates can I claim on a Emerald heat pump in South Australia?

On top of federal STCs (worth $640-$640), South Australia households can stack Retailer Energy Productivity Scheme (REPS), taking total rebates to $640-$640. Your installer applies the discounts at quote time, so you do not chase the paperwork.

Is a Emerald heat pump worth it in South Australia?

Yes. With 60% of South Australia homes on gas or old electric storage and rising energy prices, a Emerald heat pump running at COP 4.9 cuts hot water running costs to around $242/year. Households wanting a high published efficiency and a long tank warranty without paying split-system prices

Where can I get a Emerald heat pump installed in South Australia?

PumpSwap matches you with local South Australia installers who quote on Emerald systems. Submit one request and compare up to three quotes from installers covering your suburb, with rebates already factored in.

Compare other brands in South Australia

Free Quote
Step 1 of 5

What are you replacing?

Tap one to continue