Emerald Heat Pump Prices in New South Wales

A Emerald hot water heat pump is $2,750 - $3,750 installed in New South Wales before rebates. After New South Wales rebates and federal STCs, most households pay around $1,470-$2,780 out of pocket. Emerald Energy is an Australian company that has sold hot water heat pumps here since 2006, and its All-In-One range is now one of the most widely stocked propane (R290) units in the country. The Pro series is the flagship: an enamel tank with two magnesium anodes, a published coefficient of performance between 4.8 and 5.2, and operation down to -7C on the heat pump alone. The Select series sits below it on both efficiency and warranty. Emerald describes itself as Australian and does not publish where the units are built.

Emerald price in New South Wales (2026)

Installed, before rebates
$2,750 - $3,750
NSW rebates + STCs
$970-$1,280
Out of pocket (after stack)
~$1,470-$2,780

Out-of-pocket assumes federal STCs plus New South Wales's available rebate stack, applied by your installer at point of sale. Cheapest model: Emerald All-In-One Pro 220L from $2,750.

7yr
Tank warranty
5yr
Compressor warranty
4.9
COP (efficiency)
49dB
Noise level

Emerald rebates in New South Wales

Federal

Small-scale Technology Certificates (STCs)

Applied as a point-of-sale discount on your Emerald system. Value varies by model and climate zone.

$640 - $640
estimated value
Certificate

Energy Savings Scheme (ESS) Certificates

All New South Wales households. An upfront point-of-sale discount via participating retailers: up to $640 when replacing an electric water heater with a heat pump, or up to $330 when replacing a gas system. The exact amount varies by installer, model and location.

$330 - $640
estimated value

Emerald models available in New South Wales

Emerald All-In-One Pro 220L

$2,750 - $3,500
installed, before rebates
Capacity
220L
Running cost
~$242/yr
STC value (zone 3)
~$640
Noise
49dB

Emerald All-In-One Pro 270L

$3,200 - $3,600
installed, before rebates
Capacity
270L
Running cost
~$247/yr
STC value (zone 3)
~$640
Noise
49dB

Emerald All-In-One Pro 320L

$3,400 - $3,750
installed, before rebates
Capacity
320L
Running cost
~$228/yr
STC value (zone 3)
~$640
Noise
49dB

Emerald All-In-One Select 270L

$3,050 - $3,300
installed, before rebates
Capacity
270L
Running cost
~$269/yr
STC value (zone 3)
~$640
Noise
50dB

Emerald prices across New South Wales

Local pricing and free quotes for Emerald in major New South Wales areas.

Heat pump guides for New South Wales

Emerald in New South Wales: FAQ

How much does a Emerald heat pump cost in New South Wales?

A Emerald hot water heat pump costs $2,750 - $3,750 fully installed in New South Wales before rebates. After stacking those rebates, most New South Wales households pay around $1,470-$2,780 out of pocket.

What rebates can I claim on a Emerald heat pump in New South Wales?

On top of federal STCs (worth $640-$640), New South Wales households can stack Energy Savings Scheme (ESS) Certificates, taking total rebates to $970-$1,280. Your installer applies the discounts at quote time, so you do not chase the paperwork.

Is a Emerald heat pump worth it in New South Wales?

Yes. With 50% of New South Wales homes on gas or old electric storage and rising energy prices, a Emerald heat pump running at COP 4.9 cuts hot water running costs to around $242/year. Households wanting a high published efficiency and a long tank warranty without paying split-system prices

Where can I get a Emerald heat pump installed in New South Wales?

PumpSwap matches you with local New South Wales installers who quote on Emerald systems. Submit one request and compare up to three quotes from installers covering your suburb, with rebates already factored in.

Compare other brands in New South Wales

Free Quote
Step 1 of 5

What are you replacing?

Tap one to continue