Upgrade Electric Hot Water to Heat Pump in Pialligo, ACT
Upgrading from an electric storage tank to a heat pump in Pialligo is the easiest and most cost-effective hot water switch you can make. Heat pumps use the same electrical connection but consume 60-75% less energy, delivering savings of $800-$1,400 per year on your electricity bills.
Cost Comparison
| Cost Factor | Electric Hot Water | Heat Pump |
|---|---|---|
| Annual running cost | $1,200 - $1,800/yr | $200 - $400/yr |
| Annual savings | - | $800 - $1,400/yr |
| Energy efficiency | COP ~1.0 | COP 3.0 - 4.0 |
| Installation cost (after rebates) | - | $2,400 - $4,800 |
| Estimated payback period | - | 2 - 4 years |
Worked example for Pialligo: a mid-range heat pump quoted at about $5,100 installed comes to about $3,600 once federal STCs and Sustainable Household Scheme are taken off, for households that qualify. Climate zone 7 sets the STC count, so your own quote will differ.
The Easiest Hot Water Upgrade
Replacing an electric storage tank with a heat pump is the simplest swap because both systems use the same electrical connection. There is no gas disconnection required and no roof work needed. In most Pialligo installations, your existing wiring and plumbing connections are reused, keeping installation time and cost to a minimum. A heat pump is 3-4 times more efficient than a standard electric element, delivering the same hot water for a fraction of the energy.
Heat pump guides for the Australian Capital Territory
- Australian Capital Territory heat pump rebates and how to claim them
- Heat pump hot water cost in Canberra and the Australian Capital Territory
- Heat pump installers in the Australian Capital Territory
- Every Australian heat pump rebate, with the dated changes
- The best heat pump hot water brands in Australia
How to Switch from Electric Hot Water to Heat Pump in Pialligo
Get a site assessment
A licensed installer visits your Pialligo home to assess your current electric storage tank, available space, and existing electrical connections.
Choose your heat pump system
Select the right heat pump based on your household needs. Since you already have an electric connection, the swap is straightforward.
Simple swap installation
Your old electric storage tank is removed and the heat pump is installed in its place. In most cases, the existing electrical connection is reused, making this the simplest upgrade path.
Claim rebates and enjoy lower bills
STCs are applied as a point-of-sale discount. State rebates bring costs down further. Your electricity bills drop immediately thanks to the heat pump using 60-75% less energy.
Rebates Available in Pialligo, ACT
The same rebates apply whether you are replacing a electric system or any other type. All heat pump installations in Australian Capital Territory qualify for these incentives.
Small-scale Technology Certificates (STCs)
Applied as a point-of-sale discount by your installer. Value varies by system type and climate zone.
Sustainable Household Scheme
Australian Capital Territory residents who own their home. A low-interest loan (3% fixed, up to 10 years, no fees), not interest-free. The maximum is $20,000 for new applicants approved on or after 1 July 2026 ($15,000 for earlier applicants). Covers hot water heat pumps, household batteries, electric heating and cooling, electric cooktops, EV chargers and ceiling insulation. Rooftop solar was removed from the scheme on 1 July 2025.
What happens to my old electric hot water tank?
Your installer removes and responsibly disposes of the old electric storage tank. Since heat pumps use the same electrical connection, there is no additional wiring work in most cases. The old tank location is often used for the new heat pump, keeping the installation neat and minimising plumbing changes.
Replacing a Different System?
What are you replacing?
Tap one to continue